Author Topic: WTB: 26 Spline 1310 CV yoke for a Dana 20 / Dana 300  (Read 3118 times)

ddechri

  • Full Member
  • **
  • Posts: 175
    • View Profile
WTB: 26 Spline 1310 CV yoke for a Dana 20 / Dana 300
« on: September 14, 2015, 02:07:55 pm »
I need a 26 Spline 1310 CV yoke for a Dana 20 / Dana 300.

I'm putting a CV rear driveshaft in the CJ7. Found a Bronco CV driveshaft that fits perfectly. Came with a 10 spline yoke for the Tcase. Turns out my Dana 20 has the 26 spline output shafts. The 10 spline yokes are more common for older rigs.

Just wondering if anyone has one laying around. Might have been on the front of a Quadratrac or D20 in a FSJ or CJ7. There may be other applications out there.

- Dave
Dave DeChristopher
'79 CJ-7: 4.0L, T18, bronco geared Dana 20, D30/D44 (locked), Warn 8274
'60 Willys PU: IH 304 V8, wide T19, Dana 18, OD, PTO Winch, SOA D44/D53(Power Lock) w/4.27's, 33's,
'68 CJ5 - Dauntless, SM420 (project)
'98 Dodge Ram 2500 12V CTD QC LWB
"Where ever I go, there's I AM"

BCjeeper

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: WTB: 26 Spline 1310 CV yoke for a Dana 20 / Dana 300
« Reply #1 on: September 24, 2015, 02:41:49 pm »
If you're putting it on the rear, the yoke from a 231 will work.  May have some clearance issues on the front.
Jim Neidrich

ddechri

  • Full Member
  • **
  • Posts: 175
    • View Profile
Re: WTB: 26 Spline 1310 CV yoke for a Dana 20 / Dana 300
« Reply #2 on: October 16, 2015, 01:08:34 pm »
Found one on the front of Mike's YJ. But looks like it came from a Dana 20 anyway.

- Dave
Dave DeChristopher
'79 CJ-7: 4.0L, T18, bronco geared Dana 20, D30/D44 (locked), Warn 8274
'60 Willys PU: IH 304 V8, wide T19, Dana 18, OD, PTO Winch, SOA D44/D53(Power Lock) w/4.27's, 33's,
'68 CJ5 - Dauntless, SM420 (project)
'98 Dodge Ram 2500 12V CTD QC LWB
"Where ever I go, there's I AM"