Author Topic: Dynabeads  (Read 18721 times)

Scott Gibson

  • Full Member
  • **
  • Posts: 120
    • View Profile
Dynabeads
« on: February 21, 2010, 10:56:13 am »
I just mounted a new set of 37" Swampers and was worried I wouldn't get  them to balance.  I remember seeing something on this forum about the Dynabeads so I ordered 5 bags of the larger ones that you just lay inside when mounting.  They are very easy to install,balance better than lead weights,and you don't have to worry about knocking any of the weights off when wheelin. They are awesome and I will use them to balance everything in the future.

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: Dynabeads
« Reply #1 on: February 21, 2010, 12:31:08 pm »
shouldve gone with them, i just had my boggers balanced,      the weights look like a silver trim ring there are that many of them.   seen them at kw2j yesterday. if they can balance 37's they should do mine fine.
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

Lockers

  • Full Member
  • **
  • Posts: 168
    • View Profile
Re: Dynabeads
« Reply #2 on: February 21, 2010, 02:49:19 pm »
Where did you buy the dynabeads?
Dan McKenna

94 YJ - 4.5" RE lift, 35" Pit Bull Rockers, D44's w/ARB's, Warn Winch, 4:1 Tera Low
06 LJ - 4.5" RE Long Arm Lift, 33" BFG's, 
67 Gladiator - (Future Project)
07 Dodge 2500 CTD / Tow Rig

Scott Gibson

  • Full Member
  • **
  • Posts: 120
    • View Profile
Re: Dynabeads
« Reply #3 on: February 21, 2010, 04:32:24 pm »
I ordered them online at www.innovativebalancing.com  They have tire charts on there that tells you what you need per tire size.  I put 10oz in each tire like the chart said and they are as smooth as can be.

Lockers

  • Full Member
  • **
  • Posts: 168
    • View Profile
Re: Dynabeads
« Reply #4 on: February 21, 2010, 07:27:51 pm »
Thanks Scott..
Dan McKenna

94 YJ - 4.5" RE lift, 35" Pit Bull Rockers, D44's w/ARB's, Warn Winch, 4:1 Tera Low
06 LJ - 4.5" RE Long Arm Lift, 33" BFG's, 
67 Gladiator - (Future Project)
07 Dodge 2500 CTD / Tow Rig

Davew

  • Full Member
  • **
  • Posts: 167
  • Jenn's On Board Mechanic
    • View Profile
Re: Dynabeads
« Reply #5 on: February 25, 2010, 06:52:32 pm »
Yep good stuff . I use them on Jenn's and at work. 
Stupidity, if left untreated is self-correcting

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: Dynabeads
« Reply #6 on: February 25, 2010, 07:11:38 pm »
just fyi i got some of these at KNOW WHERE 2 JEEP in manchester for about 1.90 an ounce, he also has the offroad dyna beads also there a larger bead than the street ones.
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

Lockers

  • Full Member
  • **
  • Posts: 168
    • View Profile
Re: Dynabeads
« Reply #7 on: February 25, 2010, 10:34:31 pm »
I'm getting ready to change my 35" BFG's to new rims, which beads should I use, the standard size or the larger off road beads?
Dan McKenna

94 YJ - 4.5" RE lift, 35" Pit Bull Rockers, D44's w/ARB's, Warn Winch, 4:1 Tera Low
06 LJ - 4.5" RE Long Arm Lift, 33" BFG's, 
67 Gladiator - (Future Project)
07 Dodge 2500 CTD / Tow Rig

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: Dynabeads
« Reply #8 on: February 26, 2010, 07:50:54 am »
id give him a call at KW2J (717) 739-8029, he was explaining the difference between the two to me yesterday, i went with the offroad but mine are ss boggers.
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

Lockers

  • Full Member
  • **
  • Posts: 168
    • View Profile
Re: Dynabeads
« Reply #9 on: February 26, 2010, 12:44:54 pm »
Thanks for the info.
Dan McKenna

94 YJ - 4.5" RE lift, 35" Pit Bull Rockers, D44's w/ARB's, Warn Winch, 4:1 Tera Low
06 LJ - 4.5" RE Long Arm Lift, 33" BFG's, 
67 Gladiator - (Future Project)
07 Dodge 2500 CTD / Tow Rig

Lockers

  • Full Member
  • **
  • Posts: 168
    • View Profile
Re: Dynabeads
« Reply #10 on: February 26, 2010, 01:04:55 pm »
Hillbilly,

I should have asked before, who mounted ur tires using the beads?
Dan McKenna

94 YJ - 4.5" RE lift, 35" Pit Bull Rockers, D44's w/ARB's, Warn Winch, 4:1 Tera Low
06 LJ - 4.5" RE Long Arm Lift, 33" BFG's, 
67 Gladiator - (Future Project)
07 Dodge 2500 CTD / Tow Rig

hillbilly

  • Hero Member
  • ****
  • Posts: 1491
  • adam lewis - appalachian american - B.O.D.
    • View Profile
Re: Dynabeads
« Reply #11 on: February 26, 2010, 01:14:31 pm »
me, got a manual tire machine. works great and alot cheaper than what they want to mount them, if they even will sometimes.
build it, beat it, break it, fix it, repeat
A member of the church requests to be buried in his jeep because "It ain't never been in a hole it couldn't get out of."
   91 xj 8.5" lift -33" x 12.50 and my own additions
 94 xj (wifes) 3.5" lift and the boys 1979 cj7

Lockers

  • Full Member
  • **
  • Posts: 168
    • View Profile
Re: Dynabeads
« Reply #12 on: February 26, 2010, 01:21:00 pm »

Thanks
Dan McKenna

94 YJ - 4.5" RE lift, 35" Pit Bull Rockers, D44's w/ARB's, Warn Winch, 4:1 Tera Low
06 LJ - 4.5" RE Long Arm Lift, 33" BFG's, 
67 Gladiator - (Future Project)
07 Dodge 2500 CTD / Tow Rig

Scott Gibson

  • Full Member
  • **
  • Posts: 120
    • View Profile
Re: Dynabeads
« Reply #13 on: February 26, 2010, 06:55:55 pm »
I used the larger offroad ones because I was afraid the small ones would blow out through the valve when airing down.  And the larger ones you just lay inside the tire when mounting rather than trying to feed them through the valve stem.

Lockers

  • Full Member
  • **
  • Posts: 168
    • View Profile
Re: Dynabeads
« Reply #14 on: February 26, 2010, 07:21:36 pm »

Thanks Scott. I guess my next question would be how do the shops react when you ask them to put the beads in for you?
Dan McKenna

94 YJ - 4.5" RE lift, 35" Pit Bull Rockers, D44's w/ARB's, Warn Winch, 4:1 Tera Low
06 LJ - 4.5" RE Long Arm Lift, 33" BFG's, 
67 Gladiator - (Future Project)
07 Dodge 2500 CTD / Tow Rig