Safety / First Aid Station > Safety / On & Off The Trail

Overhead Lift Safety

(1/1)

Charlie:
Submitted for post by Steve B.

                                               Overhead Lift Safety

In the garage and the workplace there is often a need to conduct elevated work. Safe access to this elevated area can be provided by an assortment of aerial lifts. Some types are: JLG, Snorkel, scissor lifts, articulating boom platforms, etc. Any person using these types of lifts needs to be trained in their use prior to operating the equipment.

When using Aerial lifts the following requirements must be followed:
Conduct a pre-start inspection of the equipment prior to use each day. The user shall be responsible to see that this has occurred.
Ensure all warning placards on the equipment are legible and all personnel are familiar with the operator’s manual.
Ensure malfunctioning lifts are tagged “OUT OF SERVICE” and supervision is promptly notified. Equipment shall not be operated until repaired.

Ensure the controls are plainly marked as to their function.
Use equipment only on level ground.
Do not load platforms/baskets in excess of the design working load.
Use lifts for lifting personnel and small hand tools. Do not use lift in lieu of a crane.
Always be aware of electrical hazards near the work area and of your travel path. Use a spotter when working in close proximity of power lines.

When using an Aerial Lift Personnel Shall:
Not walk under a boom to gain access to the platform.
Not tie the platform off to any structure for any reason.
Stand on the platform floor. Standing or sitting or sitting on the railing is prohibited.
Wear safety harnesses and tie-off to the manufactures provided anchorage point within the platform.
Ensure that a fire extinguisher is available at all times.
Erect barricading or use a flag person when operating in high-traffic areas.
Never attempt to move an aerial lift while the boom/platform is elevated.
Always look in the direction the equipment is moving.

Navigation

[0] Message Index