« previous next »
Pages: [1]

Author Topic: sealing the valve cover  (Read 4990 times)

rkhough19

  • Guest
sealing the valve cover
« on: November 04, 2007, 08:43:29 am »
I have an 85 CJ 7 258 in line 6 cyl.  Having some trouble getting the valve cover to seal properly. I know the original valve cover was plastic, but I am dealing with an aluminum cover.
  So far I have tried:  1. just putting it back on  2. used a 1/4 inch bead of caulk and replaced the cover, still leaking.

What are my options here? Buy a new valve cover from Quadratec? Which one? ???
Logged

Rick_Bear

  • Hero Member
  • ****
  • Posts: 2077
  • Jeep Show Chairman
    • View Profile
Re: sealing the valve cover
« Reply #1 on: November 04, 2007, 10:51:33 am »
Try using a valve cover "gasket" along with high heat sealant.
Logged
Do Your Duty And History Will Do You Justice...!
06' Wrangler Rubicon Unlimited, Clayton 4" Long Arm Suspension, Clayton Full Skid Plates, AtoZ Fabrication Rock Sliders, AtoZ Fabrication Cage Addition and More modifications to come...

cjbroke

  • Guest
Re: sealing the valve cover
« Reply #2 on: November 05, 2007, 07:54:15 am »
Check your valve cover with a straight edge, it could be warped. Torque to specs.
 Cork gasket and "Great Stuff" works for me. I have one with plastic cover and one with steel. Both seep a little, but  I that's normal.
Logged
Pages: [1]
« previous next »