Messages

721

Technical Advice and Questions / Re: retreads

« on: October 25, 2008, 04:44:05 pm »

got like 10 bald 33x12.5  hate to toss em didnt know if there was another way

722

Technical Advice and Questions / retreads

« on: October 25, 2008, 04:28:04 pm »

i have run them before w/o a problem. does anyone know who takes the skins to get retread

723

Technical Advice and Questions / Re: dana 44 / cherokee

« on: October 24, 2008, 04:51:19 pm »

iyo is it worth the work?      ps you still looking for a dana 30 high pinion?

724

Technical Advice and Questions / dana 44 / cherokee

« on: October 24, 2008, 03:41:23 pm »

this may have already been discussed but i cant find it anywhere.   will dana 44's from a wagoneer fit properly under a 84-01 style cherokee.  i know the wag has front leaf springs but will the rear be a "simple" bolt in?

725

13th Annual (2008) / Re: JP Freek Magazine

« on: October 18, 2008, 07:13:05 pm »

damn we're just about evertwhere thats about the 20 th mag that has had an article about the event   pretty darn cool from such a small group of people

726

Technical Advice and Questions / Re: Looking For Upgraded Axle

« on: October 16, 2008, 09:34:07 pm »

i had the factory disco on my 91 w 3.55 gears bought one from eichelbergers w/o the disco same gearing replaced the ball joints and ujoints also the check the ujoints and some later model d30s come w 297 upgrade mine did makes a stronger front if wheeling hard  but the new axle rolled in and bolted right up plug the disco lines and no problems

727

Technical Advice and Questions / Re: Looking For Upgraded Axle

« on: October 14, 2008, 07:12:35 pm »

for an 8.25 way too much d44 on the other hand is a good check elsewere on the forum and youll find a guy withh a pr of 44 for 400 id get the d44 either way   good to have around in case.... bigger tires?

728

Technical Advice and Questions / Re: Looking For Upgraded Axle

« on: October 14, 2008, 03:46:49 pm »

good luck on a d44 from a bone yard been looking  swapped my d35 to an 8.25 got thwe same ratio the only diff is the axle tube is bigger so you need new u bolts  no welding involved rolled one out rolled one in best to get one out of a 96 or later its a stronger version

729

Technical Advice and Questions / Re: wheel size

« on: October 07, 2008, 07:18:21 pm »

sorry   "street" = all terrain   thanks i cant find a set of 15x10 steelies used so i guess ill go with the 15x8 if i find em,would like to get em by next club ride

730

Technical Advice and Questions / wheel size

« on: October 07, 2008, 03:41:52 pm »

okay this is an arguable question and i realize that but here it is...  what is the suggested rim size for 33x15x12.5  mud tires  wrangler mt to be exact,   every one i ask has a different suggestion,   the vehicle is wheeled and hard sometimes ,i run 15 x 10 on my street 33's  but ive been told to run 15x8 for more grip 

731

Vendor Feedback / Experiences / Re: L&M Tire & Wheel

« on: October 04, 2008, 09:28:04 pm »

any one know if they have a web site   have 4 toyo 15x10  need to trade for 15x10 xj    they probably got em

732

Technical Advice and Questions / vin breakdown

« on: October 01, 2008, 06:35:14 pm »

does anyone know how the xj vin is brokedown?   also does anyone know if the id plate under the hood breaks down into suspension info.               the place i pull parts removes all the wheels hard to see the rear it would be nice to just pop the hood and look for a number/letter that corresponds.

733

Technical Advice and Questions / Re: xj problem

« on: September 25, 2008, 09:01:32 pm »

got a cherokee haynes manual says about "1.egr system not functioning properly(nfp),2.ignition timing incorrect,3. thermostatic air cleaner system nfp,4. vacuum leak,5. intake air leak ,6. carb float level out of adj. ill keep checking w the shop guys see what they say

734

Technical Advice and Questions / Re: Tran's problem ?

« on: September 23, 2008, 07:14:30 pm »

shouldve thought about that mine did that with the switch after i changed to bigger tires

735

Technical Advice and Questions / Re: xj problem

« on: September 23, 2008, 07:12:12 pm »

i know it sounds stupid but did you check for any vacuum leaks or maybe a crack in the dist cap, just a try