Show Posts
1
Technical Advice and Questions / Re: yj tub on a cj7 frame
« on: July 14, 2010, 10:06:55 am »
That's a real good write-up. Here's the write-up that I used:
http://cjoffroad.com/writeup.asp?WU_ID=24&noAdd=1
The only thing this one addresses that Rick's didn't was the clutch linkage if you have a manual trans.
In Rick's link the writer used the YJ heater box but you could re-use your CJ box and swap the motors. Everything else fits the same. It's not really hard, just time consuming with having to strip everything out and replace it. Just fininshed mine last year so if you have any questions let me know and I'll be at the show if you want to look at something in person.
http://cjoffroad.com/writeup.asp?WU_ID=24&noAdd=1
The only thing this one addresses that Rick's didn't was the clutch linkage if you have a manual trans.
In Rick's link the writer used the YJ heater box but you could re-use your CJ box and swap the motors. Everything else fits the same. It's not really hard, just time consuming with having to strip everything out and replace it. Just fininshed mine last year so if you have any questions let me know and I'll be at the show if you want to look at something in person.
