PA Jeeps
The Garage => Technical Advice and Questions => Topic started by: dave on October 15, 2010, 10:15:25 pm
-
So I have a 79 CJ7 that was quadratrac. Rear went bad so I already replaced both rears from a non-qtrack jeep.
Was gonna ditch the 400 trans and swap in something else with a 300 transfer case but the tranny actually worked well.
I know some old wagoneers had the 400 tranny with a dana 20.
Does anyone know if one of these or any dana 20 cases would bolt up to mine. I know I can get an adapter to bolt on a 300 but I really don't want to lay out the coin if I can help it.
Any input appreciated.
-
i have the same issue and from what ive fingered out is the dana 20 bolts up but rick or jeremy or... know ALOT more than me.
-
watcha gonna do with the quadratrac tcase? thanks tad
-
I will most likely sell it off .
I just need to find out for sure if a dana 20 will bolt up .
And if so will the one I have out of a 79 CJ work or do I need to find one from an old wagoneer?