PA Jeeps
The Garage => Technical Advice and Questions => Topic started by: Rusty XJ on October 18, 2010, 03:24:52 pm
-
I'm trying to put a radio in my XJ and having some power issues. The purple and white wire for ignition switch seems to not be suppling power to the radio when turned on. I put the multi meter to it and it starts out at 11.72 volts and just drops to zero over the course of a minute or so. When I first installed the thing everything was peachy but 5 minutes after installing it it shut off and wouldn't come back on. After that I hooked the yellow and red wires both into the constant 12v and it worked but doesn't turn off with the ignition. Any ideas on this one?
-
red or yellow is your ignition and one (purple ?) is for memory. i think yellow is fulltime power and red is ignition.
-
that confused me too so i just walked away and had my wife do it