Messages

16

Technical Advice and Questions / Dana 300

« on: May 21, 2008, 06:56:42 pm »

 Dana 300 +  95 YJ 4 cyl (auto)= ?

  I know I need to change output shafts, just wondering is it feasible?

17

Technical Advice and Questions / Re: YJ U-Bolt Skids?

« on: February 26, 2008, 07:50:45 am »

 Definetly SAWZALL!  I prefer Milwaulkee brand they have a blade called the TORCH .  `

18

Technical Advice and Questions / Re: Body Mounts

« on: January 28, 2008, 06:20:39 pm »

  My plan is to use a sheet metal hole saw, we use them at work for rain gutters.  Thing is I really don't want any more drain holes .  Should I just sawzall the bolts, and drill the new hole, or be a aliitle more deliberate?   Meaning, I don't want to have a bunch of holes to patch.  I have all day tuesday to work on this.

19

Technical Advice and Questions / Body Mounts

« on: January 27, 2008, 05:29:49 pm »

  My HEEP is sitting on jacks in my driveway.  Tried putting a 1" Daystar bodylift on my YJ, sprayed everything down let it sit and then I snapped the first bolt.  I got all but 2 bolts out of the passenger-side, and loosened up the driver-side.    Now the 2 bolts I couldn't get out are loose but only spin,  should I cut them off ?  If I cut will I still be able to tighten the new bolts?  How do I get out the bolt that I broke? 

20

Technical Advice and Questions / 8.8 for myYJ

« on: January 06, 2008, 08:31:15 am »

  I am going monday to pick-up my new rear.  Question is My HEEP is not a DD really just a weekend warrior, but it still sees substantial street time.  I am running 33's under my 4cyl, and I am going to gear out to 4.56 maybe 4.88.  Is this going to be to much for street use?  The rear has a limited slip will I be able to keep it when I regear? Or don't I want it?  What type of locker should I go with?  Keep in mind this is a budget build.  Thanx for reading, now how about some advice .