PA Jeeps
The Garage => Technical Advice and Questions => Topic started by: dave on March 15, 2010, 10:42:10 am
-
Looking to swap an AX-15 tranny that was bolted to a 4.2 into a jeep with a 4.0 .
Does anyone know if the bell housing willl bolt up. Also it has the internal clutch slave cylinder. Will that still work?
Any help appreciated!
-
I believe the 4.2 and 4.0 have different bellhousings.
The 4.0 has a flywheel sensor on the top.
I would think you'de need some machining to mate the AX-15 to it.