Messages

676

Regional Issues / Re: WPA-4XTRAC needs help to get Rock Run 4x4 trails opened!

« on: February 16, 2009, 09:06:27 pm »

so whens the wheelin start back up got some time off for a while  cutting trails or anything scheduled?

677

Technical Advice and Questions / Re: fan clutch/99 grand cherokee 4.7L

« on: February 13, 2009, 07:42:10 am »

try checking  N.A.G.C.A.  www.nagca.com      its a grand cherokee only web site lotta info and i heard a "rumor" about a96-98 ford taurus dual fan set up fitting in there.

678

Technical Advice and Questions / Re: SYE suggestions

« on: January 27, 2009, 08:24:08 am »

if youre building an xj get this book high performance jeep cherokee xj builders guide by eric zappe you can fet it at amazon for about $15 and its worth 20 times that and im guessing you havent been under yours yet because the front dshaft is about 28" long and the rear is about 40+" if you use an sye in eliminates about 3" increasing the distance there is no way it would work unless you were having one built and using the double cardan and slip from a front dshaft which is what i plan on doing.  theres no location in your profile or id suggest someone to help you out but mt zion 4 wd in dover are a good choice  hope this helped   thnks

679

Technical Advice and Questions / Re: Drilled and Slotted Rotors ?

« on: December 27, 2008, 09:02:01 pm »

had that problem beore with the mud and slop in the holes got a rock stuck in one at the mafwda ride at rausch couldnt sneak up on a jet plane til i tore it all apart and pulled it out.   threw some factory ones back on after that

680

Technical Advice and Questions / Re: Welding Spider Gears

« on: December 15, 2008, 06:06:18 pm »

like jack said going straight is easy you go around a corner and man what a noise. try a spool sorta the same thing,there cheaper than a locker and you can go back if you dont like it, if its just traction try some sandbags     it is a four wheel drive    right?

681

Technical Advice and Questions / Re: rough country or rusty's lift kit?

« on: December 11, 2008, 04:39:59 pm »

i beat the snot out of my xj 6.5 total lift 4.5 rc and 2 daystar coil spacers and shackles and i am very pleased with the lift and have no worries about the lift the only problem i have ever had with it (been 10 months now) was a bad set of control arm bushings, they had a recall on them but were replaced fast and free and it was alot of lift companies had the same recall so no biggie there. i dont know about "easy" black thats more driver than lift. you can break something or get stuck on an easy blue ( or get stuck in a puddle)
 

682

Technical Advice and Questions / Re: rough country or rusty's lift kit?

« on: December 11, 2008, 03:39:40 pm »

i can speak for the xj rough country lift and rustys lift both were of the same quality and similar price i went with the rc lift because the shipping was $40 from topguncustomz but $155 from rc and rustys was $162 figure what i save in shipping goes elsewhere in the jeep.and as far as mt zion there great people and work with you even if you just stop by to bs

683

Regional Issues / Re: Pa - Fairview Township, York (ATTEND AND DEFEAT THIS...!)

« on: December 06, 2008, 11:07:56 am »

stole this from trailmaker at rausch he was there and got this
http://s480.photobucket.com/albums/rr166/hillbillypajeeps/?action=view&current=20081202_085714_FAIRVIEW_GALLERY.jpg

684

13th Annual (2008) / Re: Anybody remember this vendor?

« on: December 05, 2008, 08:28:49 pm »

ott  holy crap i didnt even put the two together but my uncle works(ed) for solid axle in ohio  dont talk to him much but last i heard he was there any way who was the vendor across from the kids mountain i got a diff cover from them?     little stand alot of lazer/plasma cut stuff

685

Technical Advice and Questions / Re: lift and tires for 89 xj?

« on: December 04, 2008, 03:11:11 pm »

late 80's early 90's coils in the front leafs in the rear, i think jeep forum has a good right up on it.

686

Technical Advice and Questions / Re: lift and tires for 89 xj?

« on: December 03, 2008, 04:17:06 pm »

redneck xj lift f150 frt and rear springs gives 3 inch

687

Regional Issues / Re: Pa - Fairview Township, York (ATTEND AND DEFEAT THIS...!)

« on: December 01, 2008, 08:39:26 pm »

okay first things first the complaint was a valid complaint the guys neighbors kids run their 125 cc db constantly (hours on end, nerve racking) the rest of it was bs but thankfully it was not taken lying down. the township was flooded with petitions, emails, phone calls, and the like and it was decided to kill the bill before it got anywhere its not completely dead the person who filed the complaint the township chairman and a spokesman for the people are going to see what can be done about the annoyance/noise law instaed of drafting a new uncalled for law. good to see a couple jeepers from us and rausch made it to this. there had to be over 100 concerned citizens packed into this little 30 x 30 room but everyone counts. and made the difference.

688

Technical Advice and Questions / Re: 350 engine swap in yj?

« on: November 30, 2008, 01:29:41 pm »

is your v8 computerized you will need that also and the sensors (o2,maf,map,etc) what about the radiator and will the engine hit the steering box? new driveshafts? tcase? will they match up? ive done these swaps before and theres more involved than you think just trying to help.

689

Regional Issues / Re: Pa - Fairview Township, York (ATTEND AND DEFEAT THIS...!)

« on: November 26, 2008, 03:01:37 pm »

called carla and left a message and email didnt hear anything yet

690

Regional Issues / Re: Pa - Fairview Township, York (ATTEND AND DEFEAT THIS...!)

« on: November 25, 2008, 05:13:15 pm »

sure no problem. ive been doing some research on this and apparently newberry township (where i live) passed this ordinance and we fought it and they revoked it but hellam township is in a court battle because they passed the ord and it affected a "well to do " lawyer. ill give her a call