PA Jeeps
The Garage => Technical Advice and Questions => Topic started by: Peyton on May 30, 2014, 11:25:20 am
-
Get ready to do my front transfer case seal any advice never done one before on my 85 cj
Thanks Dave
-
Spray the crap out of everything with a good penetrating oil. Make sure you torque the flange nut when putting it back together. The flange may be hard to remove, I've found that a strong air hammer will usually drive them off. Other then that, it's a pretty straight forward repair.
-
Thanks for the advice
-
Hope it was helpful.